Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on Benelli TNT 600?

Model: Benelli Tnt 600
Part: Brake pads

Video tutorial

To replace the front brake pads on the Benelli TNT 600, loosen the screws located at the top and bottom of the caliper. This will allow the caliper to be detached from the disc, and the pads inside can be removed from their housing.

Doing this will enable you to insert new pads, and the caliper can be repositioned onto the disc. Once in position, secure it to its housing by tightening the screws at the top and bottom of the caliper.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Benelli Tnt 600
How to Replace the Rear Brake Pads on a Benelli Tnt 600
Tnt 600 Position the motorcycle on the rear or front stand. Remove the caliper retaining bolt and take the caliper off the support. Use a screwdriver to deta…
How to Replace the Chain and Sprocket on a Benelli TNT 600
How to Replace the Chain and Sprocket on a Benelli TNT 600
Tnt 600 These brief and simple steps will show you how to disassemble and replace the chain and sprocket on a Benelli TNT 600 motorcycle. First, place the mo…
How to Remove the Fuel Tank from the Benelli TNT 600
How to Remove the Fuel Tank from the Benelli TNT 600
Tnt 600 Below is the procedure to remove and replace the fuel tank on the Benelli TNT 600 motorcycle. First, place the bike on a stand and start by removing …

How to Reset the Oil Service on the Honda SH Mode 125 Scooter?

In this tutorial, you will see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key but keep it in the initial position, then press and hold the "SET" button located at the bottom right of the dashboard, and simultaneously turn on the instrument panel. At this point, hold the button for about 3 seconds, or for as long as necessary for the service to reset correctly.

Watch the video!


by ScegliAuto

More videos