Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief and simple guide, we will see the instructions that will allow you to remove and replace the headlight bulbs on the Benelli TRK 502 motorcycle. First, place the bike on its centre stand and start unscrewing the fixing screws located under the panel, removing the plastic cover; then remove the bulb protection cover by disconnecting the electrical connector and unhooking the metal clip to remove it, as shown in the video. Now replace the bulb with a new one of the correct type (in this case, H7); also replace the other bulb in the same manner, following the video to the end!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on Benelli TRK 502
Replacing the Front Headlight Bulb on Benelli TRK 502
Trk 502 Replacing one of the front headlight bulbs on the Benelli TRK 502 is very simple, and here’s how to do it. With the motorcycle turned off, turn the h…
How to Change the Front Headlight Bulb on Benelli TRK 502
How to Change the Front Headlight Bulb on Benelli TRK 502
Trk 502 In today's video, we will see how to remove and replace the front headlight bulb on a Benelli TRK 502 in simple and quick steps. First, position your…
Replacing the Front Headlight Bulb on a Benelli TRK 502
Replacing the Front Headlight Bulb on a Benelli TRK 502
Trk 502 In today’s video, we will see how to remove and replace the front headlight bulb on a Benelli TRK 502. First, remove the plastic protective cap of th…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos