Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Imperiale 400
    4. : How do you replace the seat of the Benelli Imperiale 400?

Model: Benelli Imperiale 400
Part:
How do you replace the seat of the Benelli Imperiale 400?

In order to replace the seat of the Benelli Imperiale it is necessary to loosen the screws that fix the casing containing the air filter, located on the right side of the bike. Once this cover has been removed, it will be possible to loosen the screws that secure the saddle to its housing both on the left side of the bike and on the right side of the latter. As soon as all the screws have been unscrewed, it will be possible to extract the saddle from its housing, so that the new one can be installed. The latter must be fixed with the appropriate screws, also installing the air filter box.


Posted on 13 July 2022 by ScegliAuto



How do you replace the battery of the Benelli Imperiale 400?
Imperiale 400 In order to replace the battery of the Benelli Imperiale 400, you have to open the cover located on the right side of the bike, immediately under the
Fit leg protector on Benelli Imperiale 400
Imperiale 400 Do you like motorcycles but do you sometimes feel too dangerous to ride them? Are you a lover of safety as well as adrenaline? Today a short tutorial
How do you replace the spark plug of the Benelli Imperiale 400?
Imperiale 400 In order to replace the spark plug of the Benelli Imperiale 400, it is necessary to identify the side cable of the motorcycle which is connected to t

How to replace the starter motor on the Ktm XC 250

In this video tutorial we will see the instructions on how to disassemble and replace the starter motor of the Ktm XC 250 two-stroke enduro motorcycle. First of all we go to remove the plastic cover that we find on the left of the engine, unscrewing all the screws, in order to access the starter motor; then we are going to unscrew the additional screws of the starter motor, disconnecting the electrical connector to remove it and replace it with the new one, as shown in the video. At this point we are going to install the new starter motor, applying the reverse procedure of the disassembly!

Watch the video!


by ScegliAuto

More videos