|
Do it yourself
| |||
| ||||
|
Model: Benelli Tnt 125
To change the engine oil on a Benelli TnT 125, loosen the drain plug on the oil reservoir: this plug is located on the left side of the bike, directly beneath the clutch cover. Once the plug is removed, position a container under the drain hole to collect all the used oil. After the oil has completely drained, replace the oil filter located on the opposite side of the bike, and after replacement, top up through the same hole.
Updated on 17 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Tnt 125
In this tutorial, you will see how to change the engine oil in the Benelli TNT 125, a very simple and quick operation. First, wait until the engine i…
Tnt 125
Changing the engine oil in a Benelli TNT 125 is an extremely simple and quick task. First, ensure the engine is cool enough. Then, position a contain…
Tnt 125
Engine oil, along with the oil filter, should always be replaced at regular intervals to ensure proper engine function; here’s how to service the Ben…
|
How to Top Up the Oil in the Aprilia SR 50 R Scooter?
In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
