Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Benelli TNT 125?

Model: Benelli Tnt 125
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Benelli TNT 125, a very simple and quick operation. First, wait until the engine is cool enough, then position a container underneath it, locate the drain hole bolt, and unscrew it with a socket spanner.

Allow all the oil contained in the system to drain out, open the filter housing, and proceed with its replacement. At this point, all that remains is to reassemble everything and pour in the required amount of oil through the designated upper hole.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 mot…
How to Change the Engine Oil on a Benelli TnT 125?
How to Change the Engine Oil on a Benelli TnT 125?
Tnt 125 To change the engine oil on a Benelli TnT 125, loosen the drain plug on the oil reservoir: this plug is located on the left side of the bike, directl…
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 In this guide, we will discover the instructions that will allow us to carry out the routine maintenance service, replacing the engine oil and oil fi…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos