Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, learn how to change the engine oil in a Benelli TNT 125, a very simple task. First, ensure the engine is sufficiently cool, then place a container underneath and remove the lower fairing. Next, unscrew the drain bolt with a 17mm spanner, allowing the oil to drain from the system. Move to the opposite side to open the filter housing with an 8mm spanner. At this point, insert the replacement filter, reassemble everything, and pour in the necessary amount of oil through the designated hole.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Tnt 125 The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 mot…
Tnt 125 To change the engine oil on a Benelli TnT 125, loosen the drain plug on the oil reservoir: this plug is located on the left side of the bike, directl…
Tnt 125 In this tutorial, you will see how to change the engine oil in the Benelli TNT 125, a very simple and quick operation. First, wait until the engine i…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos