Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Xtrainer
Part: Engine oil

In this tutorial, we will see how to change the engine oil in the Beta Xtrainer 300, an extremely simple and quick operation. First, ensure that the engine is sufficiently cool for safe operation, then remove the relevant lower cover and position a container underneath the bike. Next, locate the drain bolt, unscrew it using a 13mm socket spanner, and let all the oil in the system drain out. At this point, simply reassemble everything and add the necessary amount of oil through the designated upper hole.

Posted on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Oil in the Beta Xtrainer 300
How to Replace the Gear Oil in the Beta Xtrainer 300
Xtrainer In today's procedure, we will see how to perform routine maintenance by replacing the transmission oil in the Beta Xtrainer 300 enduro bike. First, p…
How to Change the Engine Oil of the Beta Xtrainer 300
How to Change the Engine Oil of the Beta Xtrainer 300
Xtrainer To change the engine oil of the Beta Xtrainer 300, loosen the screws securing the skid plate located at the bottom of the bike. Once removed, you wil…
How to Change the Engine Oil on the Beta Xtrainer?
How to Change the Engine Oil on the Beta Xtrainer?
Xtrainer You can change the engine oil on the Beta Xtrainer by unscrewing the drain plug from the oil sump located at the lower central part of the bike: once…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos