Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Oil in the Beta Xtrainer 300

Model: Beta Xtrainer
Part: Transmission fluid

Video tutorial

In today's procedure, we will see how to perform routine maintenance by replacing the transmission oil in the Beta Xtrainer 300 enduro bike. First, place the bike on a stand and start unscrewing the screws of the metal cover found under the engine; then, unscrew the oil drain bolt, allowing it to drain into a container for about ten minutes while cleaning the plug of metallic residues.

At this point, unscrew the filler cap and top up with new transmission oil, following the instructions in the user and maintenance manual.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Change the Gear Oil on the Beta Xtrainer?
How to Change the Gear Oil on the Beta Xtrainer?
Xtrainer To change the gear oil on the Beta Xtrainer, loosen the drain plug on the transmission casing, located at the lower rear of the bike. Once this plug …
How to Change the Engine Oil in a Beta Xtrainer 300?
How to Change the Engine Oil in a Beta Xtrainer 300?
Xtrainer In this tutorial, we will see how to change the engine oil in the Beta Xtrainer 300, an extremely simple and quick operation. First, ensure that the …
How to Change the Engine Oil of the Beta Xtrainer 300
How to Change the Engine Oil of the Beta Xtrainer 300
Xtrainer To change the engine oil of the Beta Xtrainer 300, loosen the screws securing the skid plate located at the bottom of the bike. Once removed, you wil…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos