Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 200
Part: Engine oil

In this video, we will show you how to perform the routine maintenance service by changing the oil on a Beta RR 200 motorcycle. First, remove the protective cover from the lower part of the engine by unscrewing the fastening screws; then unscrew the oil drain bolt using a socket spanner. Allow the oil to drain into a container for about ten minutes before replacing the bolt; then pour in the new engine oil through the designated fill hole and fill to the maximum level (but not beyond), as indicated in the user and maintenance manual.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Change for Beta RR 200
Engine Oil Change for Beta RR 200
Rr 200 Today, you will learn how to change the engine oil of a 2020 Beta RR 200. First, unscrew the oil drain bolt using a socket spanner, located under the…
How do you replace the oil pump of the Beta RR 200?
How do you replace the oil pump of the Beta RR 200?
Rr 200 In order to remove the oil pump of the Beta RR 200, you need to remove the side panels located at the front of the motorcycle, immediately below the …
How to Turn Off the Engine Warning Light on a Beta RR 200
How to Turn Off the Engine Warning Light on a Beta RR 200
Rr 200 This brief guide explains how to reset the fault or service warning light on the Beta RR 200 enduro bike, as well as the RR 300. First, place the bik…

How to Change the Engine Oil in the KTM 1190 Adventure?

In this tutorial, see how to change the engine oil in the KTM 1190 Adventure, a very simple and quick operation. First, ensure the engine is cool enough. Then, remove the lower cover and place a container underneath the bike. Next, unscrew the plugs of the two drain holes using a 13mm socket, allowing the oil in the system to drain out, and remove the secondary filter for cleaning. At this point, open the housing of the main filter, insert the replacement, reassemble everything, and pour in the new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos