Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 200
Part: Engine oil

Today, you will learn how to change the engine oil of a 2020 Beta RR 200. First, unscrew the oil drain bolt using a socket spanner, located under the engine; let the oil drain into a container and wait about twenty minutes before replacing the bolt. Also, open the upper cap (screw) to allow the oil to drain out more quickly. Once done, pour the new engine oil (with the correct specifications) into the designated hole as shown in the video; fill it to the correct level and finally screw the bolt back in!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Change the Engine Oil on Beta RR 200
Change the Engine Oil on Beta RR 200
Rr 200 In this video, we will show you how to perform the routine maintenance service by changing the oil on a Beta RR 200 motorcycle. First, remove the pro…
How do you replace the oil pump of the Beta RR 200?
How do you replace the oil pump of the Beta RR 200?
Rr 200 In order to remove the oil pump of the Beta RR 200, you need to remove the side panels located at the front of the motorcycle, immediately below the …
How do you replace the rear turn signal bulb of the Beta RR 200?
How do you replace the rear turn signal bulb of the Beta RR 200?
Rr 200 It will be possible to replace the rear turn signal bulb of the Beta RR 200 by loosening the screws that secure the corresponding light located on th…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos