Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear turn signal bulb of the Beta RR 200?

Model: Beta Rr 200
Part: Tail light bulb

Video tutorial

It will be possible to replace the rear turn signal bulb of the Beta RR 200 by loosening the screws that secure the corresponding light located on the rear fender: once the spotlight has been removed from its seat, it will be possible to disconnect the corresponding connector so that the bulb can be removed.

The bulb can then be reconnected to the connector so that it is reinserted into the appropriate headlight: at this point it will be possible to reposition the headlight and secure it to verify that everything works properly.


Posted on 24 June 2025 by ScegliAuto


Related tutorials

How to replace the instrument cluster battery on the Beta RR 200?
How to replace the instrument cluster battery on the Beta RR 200?
Rr 200 To replace the instrument cluster battery on the Beta RR 200, loosen the screws that secure the instrument cluster to its housing: these screws are l…
How to Replace the Oil Pump on a Beta RR 200
How to Replace the Oil Pump on a Beta RR 200
Rr 200 To remove the oil pump from a Beta RR 200, you need to remove the side panels located at the front of the bike, just below the fuel tank: once these …
How to Replace the Clutch on the Beta RR 200?
How to Replace the Clutch on the Beta RR 200?
Rr 200 To replace the clutch on the Beta RR 200, loosen the screws securing the cover of the casing, located on the lower central part of the right side of …

How to Set the Clock on a Yamaha NMAX 125 Scooter?

In this tutorial, you will learn how to set the clock on a Yamaha NMAX 125 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following the switch to daylight saving time. First, insert the key, then turn on the instrument cluster and press and hold the "MODE" button on the left control until the clock starts to flash. Next, adjust the hour by pressing the button quickly, hold it down to switch to minutes, and similarly adjust them before finally saving the setting.

Watch the video!


by ScegliAuto

More videos