Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Rr 200
Part: Pump

In order to remove the oil pump of the Beta RR 200, you need to remove the side panels located at the front of the motorcycle, immediately below the fuel tank. Once these panels have been removed, you can locate the components inside the frame. At this point, the oil pump can be found at the front of the engine block and can be removed from its seat by unscrewing the screws and disconnecting all the appropriate pipes; in this way it will be possible to insert the new one, fixing and connecting it properly.

Posted on 14 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Rr 200 In this video, we will show you how to perform the routine maintenance service by changing the oil on a Beta RR 200 motorcycle. First, remove the pro…
Rr 200 To replace the clutch on the Beta RR 200, loosen the screws securing the cover of the casing, located on the lower central part of the right side of …
Rr 200 To replace the instrument cluster battery on the Beta RR 200, loosen the screws that secure the instrument cluster to its housing: these screws are l…

How to reset the oil change light on a Suzuki Burgman 650

Reset the service light on a Suzuki Burgman 650 after completing the required services: First, turn on the ignition. Then, press the button on the left of the instrument panel four times until the mileage until the next service appears. Hold it down for a couple of seconds. On the right side of the instrument panel, there is another button. Press this for a couple of seconds, and the oil light will start to flash. Use the left button to gradually decrease the mileage until you reach the distance at which you want to change the oil again. The YouTuber sets it to 3,000 miles. To confirm, press and hold the left button, and the reset is complete.

Watch the video!


by ScegliAuto

More videos