Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Xtrainer
Part: Clutch

To replace the clutch on the Beta XTrainer, you need to loosen all the screws that secure the clutch protection cover. This is located on the right side of the bike; once the cover cap is removed, use a socket wrench to loosen the bolts that secure the clutch discs. These can then be extracted from inside the cover and replaced with the corresponding spare parts. After installation, you can reseal the cover by tightening the securing screws. At this point, you can check the correct functioning of the vehicle.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Xtrainer In order to replace the clutch of the Beta Xtrainer, you need to loosen the screws that secure the casing located on the right side of the bike, in t…
Xtrainer To replace the clutch lever on the Beta XTrainer, loosen the screw located at the top of the lever, which also acts as a pivot. Once this screw is re…
Xtrainer To replace the clutch on a Beta XTrainer, it is advisable to lay the bike on its side, as shown in the video. Next, using a pneumatic gun or a socket…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos