Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the BMW S1000 XR.

Model: Bmw S1000 Xr
Part: Brake pads

Video tutorial

Today we will go through the steps that will show us how to disassemble and replace the front brake pads on the BMW S1000 XR motorcycle. First, we place the motorcycle on the stand and start unscrewing the bolts that secure the brake caliper, so we can remove it from the disc; we remove the pad retainers and apply pressure to the piston, thereby removing the old pads, as shown in the video.

At this point, we clean the caliper from any residual dirt and install the new original brake pads; we reattach the caliper to the disc, similarly replacing the other brake pads.


Posted on 1 December 2025 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on the BMW S1000 XR
How to Replace the Spark Plugs on the BMW S1000 XR
S1000 Xr Today, we will go through the main instructions for removing and replacing the spark plugs on the BMW S1000 XR engine. First, place the bike on its c…
How to Reset the Service Light on a BMW S1000 XR
How to Reset the Service Light on a BMW S1000 XR
S1000 Xr In this tutorial, you will see how to reset the service light on a BMW S1000 XR, a very simple and quick operation. Before proceeding, ensure that yo…
Removing the Rear Wheel of the BMW S1000 XR
Removing the Rear Wheel of the BMW S1000 XR
S1000 Xr This guide shows how to remove and replace the rear wheel or tyre of the BMW S1000 XR motorcycle. First, place the bike on the centre stand and begin…

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos