Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw S1000 Xr
Part: Wheel

This guide shows how to remove and replace the rear wheel or tyre of the BMW S1000 XR motorcycle. First, place the bike on the centre stand and begin loosening the wheel spindle bolt using a socket spanner with an extension; then disconnect the chain from the sprocket by removing the pin and sliding out the wheel, as shown in the video. At this point, replace the tyre if necessary (ensuring it has the same dimensions); then refit the rear wheel, adjusting the chain and securing the spindle, following the video to the end!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the BMW S1000 XR
How to Reset the Service Light on the BMW S1000 XR
S1000 Xr To reset the Service light on the BMW S1000 XR, connect a diagnostic tool to the vehicle's OBD port: this port is located underneath the seat of the …
How do you reset the Service light on the BMW S1000 XR?
How do you reset the Service light on the BMW S1000 XR?
S1000 Xr It will be possible to reset the Service light of the BMW S1000 XR by connecting a diagnostic tool to the OBD port of the vehicle: this port will be …
How to Reset the Service Light on a BMW S1000 XR
How to Reset the Service Light on a BMW S1000 XR
S1000 Xr In this tutorial, you will see how to reset the service light on a BMW S1000 XR, a very simple and quick operation. Before proceeding, ensure that yo…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos