Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a BMW F800 GS

Model: Bmw F800gs
Part: Headlight bulb

Video tutorial

Before starting, position your BMW F800 GS on the centre stand. Begin by turning the handlebars to the right, then switch off the instrument panel.

Next, unclip and remove the cover of the blown headlamp bulb, located in the gap between the handlebars and the instrument panel. Once done, disconnect the electrical connector attached to the bulb, then unclip the clip that secures the bulb in its housing.

At this point, extract and remove the bulb itself, completing the disassembly. To install the new bulb, follow these instructions in reverse, and the replacement will be finished.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the BMW F800 GS
How to Replace the Front Headlamp Bulb on the BMW F800 GS
F800gs In today's tutorial video, we will see how to disassemble and replace the front headlamp bulb on the BMW F800 GS motorcycle in simple steps. First, m…
How to replace the front headlight of the BMW F800 GS
How to replace the front headlight of the BMW F800 GS
F800gs The following steps will show us how to disassemble and replace the front headlight and its bulbs on the BMW F800 GS motorcycle. First, we put the mo…
How to Replace the Headlight Bulbs on a BMW F800 GS
F800gs In this tutorial, learn how to replace the headlight bulbs on a BMW F800 GS, a very simple and quick operation. First, ensure the key is not inserted…

How to Replace the Front Brake Pads on an Aprilia RS 457?

The front brake pads on an Aprilia RS 457 can be replaced by unscrewing the bolts that secure the caliper to the corresponding disc, allowing it to be removed: once the caliper has been removed, you can slide out the pin that holds the pads in their place. At this point, remove the old ones to insert the new ones: these must be secured with the appropriate pin, so that you can then reposition the caliper onto the disc. Now, secure the caliper with the bolts to ensure that the brake is functioning.

Watch the video!


by ScegliAuto

More videos