Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the power windows of the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

In order to reset the window regulator of the BMW 3 Series, you must start with the window completely lowered: at this point, you will need to hold down the button to raise it and when the window is raised, you will need to continue holding it down for a few seconds. At this point, you will need to pull the button up twice in a row to raise the window, so that the reset procedure is completed; once the reset procedure has been completed, you will notice that the window can be raised and lowered without any problems.

Posted on 7 September 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the window switch on a BMW 3 Series, fully raise the window until it reaches the highest position. Next, disconnect the connector located in…
BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the window regulator on the BMW 3 Series, it will be necessary to completely lower the window that needs to be reset: after it has been full…
BMW Serie 3 (2005-2013 / E91, E90, E92) You can reset the window regulator on a BMW 3 Series by first turning on the ignition, so you can use the window regulator buttons: you will need to …

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos