Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the window lift of the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Power window switch

To reset the window lifter of the BMW 3 Series, you will need to hold down the button corresponding to the window you want to reset: while holding down this button, you will need to insert the key into the ignition switch to turn on the dashboard. Once the dashboard is turned on, you can hold the button down for about ten seconds, then release it. Once the button is released, you will notice that the window lifter has been reset correctly.

Posted on 17 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Window Switch on a BMW 3 Series?
How to Reset the Window Switch on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the window switch on a BMW 3 Series, fully raise the window until it reaches the highest position. Next, disconnect the connector located in…
How do you reset the power windows of the BMW 3 Series?
How do you reset the power windows of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the window regulator on the BMW 3 Series, it will be necessary to completely lower the window that needs to be reset: after it has been full…
How to Reset the Window Regulator on a BMW 3 Series?
How to Reset the Window Regulator on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) You can reset the window regulator on a BMW 3 Series by first turning on the ignition, so you can use the window regulator buttons: you will need to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos