Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Window Switch on a BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

To reset the window switch on a BMW 3 Series, fully raise the window until it reaches the highest position. Next, disconnect the connector located inside the door panel.

Keep it disconnected for a few seconds to reset the window switch settings. At this point, reconnect it and check that the window raises and lowers correctly using the switch.

Finally, reinstall the door panel.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Window Switch of the BMW 3 Series
Replacing the Rear Window Switch of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, we will see in this video tutorial how to remove and replace the rear window switch of the BMW 3 Series E90 in simple and quick steps. First, …
How to reset the window regulator motor of the BMW Series 3.
How to reset the window regulator motor of the BMW Series 3.
BMW Serie 3 (1998-2006 / E46) Today's instructions will show us how to reset the window regulator motor of the BMW Series 3. First, let's get inside the vehicle and start by turni…
Reset Window Regulator on BMW 3 Series E90
Reset Window Regulator on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, see how to reset the window regulator module on a BMW 3 Series E90, fourth generation, by following the instructions below. First, get…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos