Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Window Regulator on BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

In this video, see how to reset the window regulator module on a BMW 3 Series E90, fourth generation, by following the instructions below. First, get inside the vehicle and make sure all doors are closed; then turn on the ignition and press the rear window button for about fifteen seconds, as shown in the video.

This will cause the window to open automatically, and perform the same operation for closing; this way, you will have successfully reset the window regulator module!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Window Switch of the BMW 3 Series
Replacing the Rear Window Switch of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, we will see in this video tutorial how to remove and replace the rear window switch of the BMW 3 Series E90 in simple and quick steps. First, …
How to Reset the Window Switch on a BMW 3 Series?
How to Reset the Window Switch on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To reset the window switch on a BMW 3 Series, fully raise the window until it reaches the highest position. Next, disconnect the connector located in…
Resetting the BMW 3 Series E90 Light Bulb Warning Light
Resetting the BMW 3 Series E90 Light Bulb Warning Light
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, we will see in this video tutorial how to reset the light bulb warning light in a BMW 3 Series E90 by following these simple steps. First, get…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos