Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to connect the smartphone via Bluetooth to the BMW 7 Series

Model: BMW Serie 7 E66, E67, E68, E65, MK 4 - Years 2001-2008
Part: Checks and maintenance

Today's steps will show us how to connect our smartphone via Bluetooth to the multimedia system of the BMW 7 Series. First of all, we get into the car and start the instrument panel; then, through the control knob, we select the car settings and then the phone option, as shown in the video. At this point, we select Bluetooth and follow the guided procedure to pair the devices, activating Bluetooth on our smartphone; once connected, we will be able to play multimedia content.

Posted on 24 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Installing OBD Interface for Parameter Display
Installing OBD Interface for Parameter Display
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) This accessory is a device that connects to the OBD diagnostic port of your vehicle and pairs with an application downloaded on your smartphone: it c…
How to deactivate the airbag warning light on the BMW 7 Series.
How to deactivate the airbag warning light on the BMW 7 Series.
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) Today's main instructions will show us how to reset the airbag light on the BMW 7 Series. Before performing the reset operation, it is necessary to h…
Removal and Replacement of the Rear Control Arm on BMW 7 Series
Removal and Replacement of the Rear Control Arm on BMW 7 Series
BMW Serie 7 (1994-2001 / E38, MK 3) To remove and replace the rear control arm, proceed as follows: 1) Lift the vehicle off the ground using a jack or lifts. 2) Remove the rear wheel on…

How to Remove the Front Brake Rotor on a BMW X3

Let's see how to remove the front brake rotor on a BMW X3. Position your car on a column lift and raise it to a comfortable height for working. Loosen the bolts with a socket wrench or air drill and remove the wheel, then start loosening the bolts of the brake caliper to detach it from the bracket, using a screwdriver to remove the brake pads. Now remove the caliper bracket and loosen the bolts on the brake rotor (using a Torx screwdriver), pull the rotor towards you to slide it off the wheel hub. Install the new brake rotor with all the associated bolts, tighten the caliper bracket to the rotor and the brake pads, then install the brake caliper, making sure to tighten all the bolts securely. Before mounting the wheel, bleed the brake caliper and then tighten the bolt. Finally, install the wheel with the bolts.

Watch the video!


by ScegliAuto

More videos