Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Airbag Warning Light on the BMW 7 Series

Model: BMW Serie 7 E66, E67, E68, E65, MK 4 - Years 2001-2008
Part: Warning light – error code

Today's main instructions will guide you on how to reset the airbag warning light on the BMW 7 Series; before performing the reset operation, ensure that you have resolved the airbag issue that caused the warning light to turn on. Then, get inside the vehicle and connect your diagnostic software to the ECU port, then turn on the instrument panel; follow the guided procedure to perform a general reset of the airbag control unit, as shown in the video. Make sure the airbag warning light resets on the instrument panel!

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag on a BMW 7 Series
How to Remove the Steering Wheel Airbag on a BMW 7 Series
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) Today’s instructions will show you how to remove and replace the steering wheel and its airbag on the BMW 7 Series by following these simple steps. F…
How to Remove the Dashboard of the BMW 7 Series
How to Remove the Dashboard of the BMW 7 Series
BMW Serie 7 (1994-2001 / MK 3, E38) Today, let's go through the main instructions for removing and replacing the dashboard of the BMW 7 Series. First, get inside the vehicle and start b…
Removal of the Steering Wheel Airbag
Removal of the Steering Wheel Airbag
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) This tutorial illustrates the procedure for removing the airbag from the steering wheel of a BMW 7 Series. In this case, the steering wheel has alrea…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos