Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Sensors on the BMW 7 Series

Model: BMW Serie 7 E68, MK 4, E65, E67, E66 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tire pressure warning light

See other generations:
Video tutorial

This guide provides instructions to reset the tire pressure sensors on the BMW 7 Series. Before resetting the TPMS warning light, ensure all four tires are at the correct operating pressure.

Then, get in the vehicle and turn on the ignition. Next, navigate to the vehicle settings using the control on the center console until you reach the tire pressure monitor screen.

At this point, confirm and execute the reset of the TPMS sensors, permanently turning off the warning light.


Posted on 4 August 2026 by ScegliAuto


Related tutorials

How to Reprogram the Electronic Tire Sensors on BMW Vehicles
How to Reprogram the Electronic Tire Sensors on BMW Vehicles
BMW Serie 7 (2015-2022 / MK 6, G11, G12) Note that the tutorial video provided was made using a 2017 BMW 7 Series, but the work done applies to any BMW vehicle. The electronic sensors that m…
How to Reset the Tire Pressure Light on the BMW 7 Series MK6
How to Reset the Tire Pressure Light on the BMW 7 Series MK6
BMW Serie 7 (2015-2022 / MK 6, G11, G12) Let's see the procedure to reset the tire light on the BMW 7 Series MK6 (G11/G12). The entire procedure is managed by the iDrive system (there are no…
How to Reset the Tire Light on a BMW 7 Series?
How to Reset the Tire Light on a BMW 7 Series?
BMW Serie 7 (2015-2022 / MK 6, G11, G12) In this tutorial, you will see how to reset the tire light on a BMW 7 Series, a very simple and quick operation that should be done only after restor…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos