Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reprogram the Electronic Tire Sensors on BMW Vehicles

Model: BMW Serie 7 MK 6, G11, G12 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

See other generations:
Video tutorial

Note that the tutorial video provided was made using a 2017 BMW 7 Series, but the work done applies to any BMW vehicle. The electronic sensors that monitor tire inflation pressure activate the warning light if the pressure is lower than expected.

These sensors are located on the valve of the tires. Especially when the tires are replaced, it is necessary to reprogram the sensors.

To do this, connect the electronic device shown in the video to the vehicle's OBD port, which will manage the entire procedure.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Sensors on the BMW 7 Series
How to Reset the Tire Pressure Sensors on the BMW 7 Series
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) This guide provides instructions to reset the tire pressure sensors on the BMW 7 Series. Before resetting the TPMS warning light, ensure all four tir…
How to Reset the Tire Pressure Light on the BMW 7 Series MK6
How to Reset the Tire Pressure Light on the BMW 7 Series MK6
BMW Serie 7 (2015-2022 / MK 6, G11, G12) Let's see the procedure to reset the tire light on the BMW 7 Series MK6 (G11/G12). The entire procedure is managed by the iDrive system (there are no…
Where Are the Parking Sensors Located on the BMW 7 Series?
Where Are the Parking Sensors Located on the BMW 7 Series?
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) In this video, you can see where the front parking sensors are located on the BMW 7 Series, useful if you need to replace a malfunctioning one. As sh…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos