Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Parking Sensors Located on the BMW 7 Series?

Model: BMW Serie 7 E66, E67, E68, E65, MK 4 - Years 2001-2008
Part: Parking sensors

In this video, you can see where the front parking sensors are located on the BMW 7 Series, useful if you need to replace a malfunctioning one. As shown, the sensors are located at the front of the bumper, positioned right next to the license plate. To remove them, insert a flat tool, like a plastic spatula, into the indicated slot and pry to unlock the panel. Once done, completely remove it, disconnect the rear connector of the sensor, and take out the sensor by unlocking the corresponding clip. To install the replacement, follow the exact reverse procedure.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the BMW 7 Series?
Where are the fuses located in the BMW 7 Series?
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) The fuses in the BMW 7 Series are located inside dedicated fuse boxes present in the vehicle: in this car model, you can find two boxes for holding t…
Where are the fuses located in the BMW 7 Series?
Where are the fuses located in the BMW 7 Series?
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) Each fuse of the BMW 7 Series is contained within one of the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it is…
How to Reset the Tire Pressure Sensors on the BMW 7 Series
How to Reset the Tire Pressure Sensors on the BMW 7 Series
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) This guide provides instructions to reset the tire pressure sensors on the BMW 7 Series. Before resetting the TPMS warning light, ensure all four tir…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos