Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure on a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Checks and maintenance

Today we are shown how to reset the tire pressure on a BMW 3 Series, F30 model produced from 2012 to 2019. Before performing this operation, it is important to verify the correct pressure of all four tires as indicated by the manufacturer, let's see how to proceed. Let's start by turning on the ignition of the vehicle, then use the knob on the central console to navigate the menu of the navigation display and select the "vehicle information" option, then continue by selecting "vehicle status" and then "confirm tire pressure", finally click on "initialize tire pressure" and wait for the reset to complete.

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the recommended pressure value: this val…
How to Reset the Tire Pressure Light on a BMW 3 Series?
How to Reset the Tire Pressure Light on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To reset the tire pressure light on a BMW 3 Series, first inflate all tires to the correct pressure. Once all tires are inflated, enter the cabin. Tu…
Resetting the tire pressure warning light on the BMW 3 Series.
Resetting the tire pressure warning light on the BMW 3 Series.
BMW Serie 3 (2005-2013 / E91, E90, E92) The instructions in this guide will allow us to reset the tire pressure warning of the BMW 3 Series; before resetting the TPMS sensors, it is necessa…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos