Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the oil change light on a BMW 5 Series E60 version

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Service warning light

In this video we can see how to reset the service light on a BMW 5 Series E60 version: close the doors and turn on the instrument panel, without starting the engine. Wait for the instrument panel to display the service information, until it stops at the standard display, where in the large display at the bottom we will find the information of the gear engaged, total and partial kilometers. If the display is not the standard one, press several times on the body computer button located on the turn signal lever, until you get there. Hold down the partial reset button located on the left side of the instrument panel. After the display of the triangle with the exclamation point, the first maintenance to be reset will appear. Immediately release the button (do not wait for the maintenance image to disappear, otherwise you will start over. Press the partial button on the left side of the instrument panel again. The message "reset?" will appear. Release and press again, holding down to confirm the reset.

Posted on 4 December 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (2003-2010 / E61, E60) In this video, you will learn how to reset the service light on a BMW 5 Series E60/E61 (produced from 2003 to 2010). First, get in the car and ensure…
BMW Serie 5 (2003-2010 / E61, E60) Follow these steps to manually reset the engine oil light on your BMW 5 Series E60 (2003-2010). First, enter the vehicle and locate the button just b…
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will learn how to reset the brake light on a BMW 5 Series E60. First, get inside the vehicle and turn on the ignition. Th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos