Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : How to reset the service light on a BMW 5 Series E60/E61 version.

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E60, E61 - Years 2003-2010
Part: Instrument cluster
Operation: How to reset the service light on a BMW 5 Series E60/E61 version.

In this video, we see how to reset the service light on a BMW 5 series E60/E61 version (that is, productions from 2003/2010). First, we need to get into the car and make sure all doors are closed. We should also pull the handbrake for safety. We turn on the ignition without starting the engine. We press the button located at the bottom right of the speedometer and scroll through the various options until we find the oil light. We hold it down for a few seconds and then release it. The light has turned off. If we want to verify, we can turn off the instrument panel and then turn it back on.


Posted on 19 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 5 2003-2010 - Where are the BMW 5 Series e60 serv warning lights shown? Read Answer
    • Serie 5 2003-2010 - Why doesn't my BMW 5 Series instrument cluster light up? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos