Do it yourself
Frequently asked questions about cars and motorcycles

Localization of the fuse boxes of the BMW 5 Series E60/E61

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Fuse box

In this video we can see the location of the fuse boxes of the BMW 5 Series E60/E61 version: the first box is located inside the glove compartment: to access this box you need to empty the drawer, rotate its clips and remove the cover. In the trunk, on the right side, we can find another box inserted above the wheel arch, behind a trim panel. A third box is located in the engine compartment, between the windshield wiper downpipe, on the left side, and the front shock absorber strut. Some relays are also located in the same position, but on the opposite side of the vehicle's engine compartment.

Posted on 30 September 2025 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (2003-2010 / E61, E60) Today, you will learn how to install a tow hitch on the BMW 5 Series E60 and E61 by following these simple steps. First, remove the rear bumper from …
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, you will learn the main steps to remove and replace the automatic gear shift lever on the BMW 5 Series E60 and E61. First, get insi…
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 5 2003-2010 - Where is the license plate light fuse located on the BMW 5 Series? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos