Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fold Down the Rear Seats on BMW X1

Model: BMW X1 E84 - Years 2009-2015
Part: Seat

How to fold down the rear seats on BMW X1 to create space in the trunk. First, pull the lever located on the seatback, move the seat forward, and let it rest on the seat cushion. Repeat the same steps on the other rear seatbacks of the vehicle, performing the previously mentioned maneuvers. Lift the seatbacks to return them to the upright position (pull the strap to lock them). Now that you have flattened the trunk of the vehicle, you can load the volume of items you desire.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to lower the rear seats of the BMW X1
How to lower the rear seats of the BMW X1
BMW X1 (2009-2015 / E84) These short and simple instructions will show us how to lower the rear seats of the BMW X1. First, we open the rear doors of the car and pull the lev…
How to lower the rear seats in the BMW X1?
How to lower the rear seats in the BMW X1?
BMW X1 (2015-2022 / F48) In this tutorial we can see how to lower the rear seats in the BMW X1, a very simple and quick operation, to be carried out for example in case we ne…
How do you fold down the rear seats in a 2023 BMW X1?
How do you fold down the rear seats in a 2023 BMW X1?
BMW X1 (2022-2026 / U11) Folding down the rear seats of this car is really a piece of cake. First of all, make sure there is nothing obstructing the seats. Then, look for the…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos