Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lower the rear seats in the BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Seat

In this tutorial we can see how to lower the rear seats in the BMW X1, a very simple and quick operation, to be carried out for example in case we need more space in the trunk. First of all, we open both rear doors, then we locate the strap located in the lower outer area of the first backrest, grab it and pull it towards us. At the same time, we grab the backrest, press it down and repeat the operation on the opposite side. To bring the backrests back to their original position, it will be sufficient to pull the straps again and press the headrests against the wall.

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to lower the rear seats of the BMW X1
How to lower the rear seats of the BMW X1
BMW X1 (2009-2015 / E84) These short and simple instructions will show us how to lower the rear seats of the BMW X1. First, we open the rear doors of the car and pull the lev…
How to Adjust the Rear Seat Position in a BMW X1
How to Adjust the Rear Seat Position in a BMW X1
BMW X1 (2015-2022 / F48) In this short and simple guide, you will learn how to adjust the rear seat position in a BMW X1 by following the instructions below. First, open the …
How to recline the rear seats of the BMW X1
How to recline the rear seats of the BMW X1
BMW X1 (2015-2022 / F48) Today we will see the instructions that will allow us to recline the backrests of the rear seats of the BMW X1, following these simple steps. First o…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos