|
Do it yourself
| |||
| ||||
How to reset the brake pad indicator light on the BMW 3 Series E91
Model: BMW Serie 3
E91, E90, E92
- Years 2005-2013
In today's article, we will show you how to reset the brake pad warning light on the BMW 3 Series E91. For this operation, no tools or software are needed. To reset the light, you need to start the instrument panel, then press and hold the button on the panel to access the menu. Once the menu appears, use the appropriate button on the direction indicator control to navigate to the brake warning light for either the rear or front brakes, depending on which light needs to be reset. Once selected, press the BC button and hold it until the word RESET appears below the light. Once the word RESET appears, release the button, then press and hold it again to perform the reset. After resetting the light, restart the instrument panel to verify that the procedure was successful.
Posted on 25 March 2025 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 3
(2005-2013 /
E91, E90, E92)
In today's tutorial video, you will learn how to reset the brake pad light on the BMW 3 Series E90 and E91 in simple and quick steps. First, get in t…
BMW Serie 3
(2005-2013 /
E91, E90, E92)
In today's article, we will see how to reset the brake pad warning light on the BMW 3 Series E90. It is recommended to perform the reset only after r…
BMW Serie 3
(2012-2019 /
F30, F31)
Follow these instructions to reset the brake pad wear warning light on a BMW 3 Series. After replacing the old brake pads, get in the vehicle and tur…
Other guides you may be interested in |
How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI
Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.314
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |