Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel of the BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

The information provided in this guide will show us how to disassemble the rear door panel of the BMW 3 Series, in simple and quick steps. First, we open the rear door of the car and start removing the plastic cover of the handle by prying on the sides; then we unscrew the fixing screws found underneath, and then pry on the sides of the panel to detach it, as shown in the video.

At this point, we disconnect the electric connector of the window button and the handle cable, thus accessing the internal components of the door!


Posted on 4 April 2025 by ScegliAuto


Related tutorials

How to disassemble the rear tailgate panel of the BMW 3 Series
How to disassemble the rear tailgate panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In this guide we will see the instructions that will allow us to disassemble and replace the rear tailgate panel of the BMW 3 Series. First of all, w…
How to disassemble the front door airbag of the BMW 3 Series
How to disassemble the front door airbag of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) These short and simple steps will allow us to disassemble and replace the airbag of the front door of the BMW 3 Series. First, we open the front door…
How to disassemble the front seat of the BMW 3 Series
How to disassemble the front seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the instructions that will allow us to disassemble and eventually replace the front seat of the BMW 3 Series. First, we op…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos