Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : Let's see how to replace the fog light bulbs on BMW 1 Series

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 F20, F21, MK 2 - Years 2011-2019
Part: Fog lights
Operation: Let's see how to replace the fog light bulbs on BMW 1 Series

Let's see how to replace the fog light bulbs on BMW 1 Series. Let's get ready to remove the plastic coating in the lower part of the bumper with a special screwdriver, we get to the side fog light placed in the bumper. After removing the lamp holder; we remove the damaged bulb and mount a new one (same size and voltage). We reassemble the plastic trim under the car bumper with attached pins. We test the correct functioning of the lights. We carry out this replacement on the front and rear lights, to have the same type of lighting.


Posted on 23 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos