Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Tail light bulb

Are the rear light bulbs blown? Let's see how to disassemble them on a BMW 1 Series. Open the boot lid and secure it. Remove the cover of the rear light (located at the side of the boot). Pull the bulb holder out of the rear light and extract all the damaged bulbs. Install the new bulbs into the bulb holder and then fit it back into the light. After fitting the bulb holder, you can close the compartment with the cover. Test the lights to ensure they are functioning correctly: open the door and enter the vehicle, turn on the instrument panel and the ignition switch.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light of a BMW 1 Series?
How to replace the rear light of a BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the rear light of a BMW 1 Series, start by opening the rear hatch and removing the inner lining that covers the back of the body. Locate t…
How to Remove the Rear Light of the BMW 1 Series
How to Remove the Rear Light of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this tutorial, learn how to remove and replace the rear light, as well as access the bulbs, of the BMW 1 Series. First, open the boot and remove t…
Removing the Rear Light on a BMW 1 Series F20
Removing the Rear Light on a BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video tutorial, you will see how to remove the rear light and replace the bulbs on a BMW 1 Series F20. First, open the boot of your vehicle a…

    Frequently Asked Questions

    • Serie 1 2011-2019 - Cost of replacing rear light bulb on BMW 1 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos