Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on the BMW 320D E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Onboard computer

In today's article, we will show you how to adjust the clock on the instrument panel of the BMW 320D E46. The procedure takes little time to be carried out and no tools are needed. To adjust the time, you must first start the instrument panel, then press the BC button on the side of the turn signal control until the time appears on the panel. At this point, you must use the button on the right side of the panel, turning it right or left to adjust the time. Once the time is adjusted, restart the instrument panel and the procedure will be complete.

Posted on 31 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the odometer of the 1999 BMW 320d E46, after changing the engine oil?
How do you reset the odometer of the 1999 BMW 320d E46, after changing the engine oil?
BMW Serie 3 (1998-2006 / E46) It is time to change the engine oil of our BMW E46 320d, after covering the mileage specified in the last service, or because a certain amount of tim…
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove and replace the coolant hose on a BMW 3 Series E46, as well as on the 3 Series 320d E90. First, open the hood of …
Removing the Starter Motor on the BMW 3 Series E46 320D
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove the starter motor on the BMW 3 Series E46 320D by following the instructions below. First, open the hood and remo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos