Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs of the BMW X4.

Model: BMW X4 MK 1, F26 - Years 2014-2018
Part: Tail light bulb

Let's go through the steps that will allow us to disassemble and replace the bulbs of the rear light of the BMW X4. First, we open the rear hatch of the trunk and start unscrewing the fastening screws located on the side of the light, disconnecting the electrical connector for the lights located at the back to remove it; then we separate the bulb holder from the light fixture, replacing any faulty stop bulbs with new ones (with the same fitting), as shown in the video. At this point, we reassemble the rear light, checking the operation of all the stop lights.

Posted on 28 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the external door handle of the BMW X4
How to remove the external door handle of the BMW X4
BMW X4 (2018-2025 / G02) The instructions provided in this guide will show us the process of disassembling and replacing the external handle of the rear door of the BMW X4, i…
How do you replace the SOS system battery in the BMW X4?
How do you replace the SOS system battery in the BMW X4?
BMW X4 (2014-2018 / MK 1, F26) The BMW SOS device, specifically referring to the BMW X4, activates when an emergency situation is detected, such as a vehicle collision. Automatical…
How to Replace the Key Fob Battery for the BMW X4?
How to Replace the Key Fob Battery for the BMW X4?
BMW X4 (2014-2018 / MK 1, F26) To replace the key fob battery for the BMW X4, remove the key from the top of the device by pressing the appropriate button to extract it. Once the k…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos