Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the armrest on the BMW Series 3

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to install the armrest on the BMW Series 3. First, let's get inside the cabin and start disassembling the center tunnel by unscrewing the fastening screws located under the covers and removing the buttons (disconnecting the connectors located underneath); then we will install the armrest compatible with our vehicle, securing it to the rear, as shown in the video.

At this point, we reassemble all the components of the center tunnel, making the electrical connections, following the video tutorial until the end!


Posted on 7 January 2026 by ScegliAuto


Related tutorials

How to Remove the Armrest of the BMW 3 Series
How to Remove the Armrest of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide will show you how to remove and replace the armrest of the BMW 3 Series, following the instructions below. First, access the rear of the v…
How to Remove the Armrest of the BMW 3 Series
How to Remove the Armrest of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, see the steps to remove and replace the armrest of the BMW 3 Series, following the instructions below. First, get inside the vehicle and start…
Replacing the Armrest of the BMW 3 Series
Replacing the Armrest of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The following steps will show you how to disassemble and replace the armrest of the BMW 3 Series. First, get inside the vehicle and start removing th…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos