Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the Windshield Seal on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

How to remove and install the windshield seal on a BMW 3 Series? Don't worry, follow these steps for removal. Start disassembling: take a piece of rubber seal and use a pry tool to follow the perimeter of the windshield (prying), pull, and continue along the perimeter of the windshield.

Use your hands to pull the windshield seal to detach it from the perimeter. Next, clean the perimeter of the windshield with a suitable scraper.

Finally, press and lay the new seal into the perimeter. Check that the seal is correctly inserted at all points.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Seal on a BMW 3 Series?
How to Replace the Windshield Seal on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, you will see how to replace the windshield seal on a BMW 3 Series, a very simple and quick operation. First, position yourself in f…
How to Replace the Windshield Seal on a BMW 3 Series?
How to Replace the Windshield Seal on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the windshield seal, pry up the bottom part of the seal with a tool to detach it from the body. Once the old seal is removed, clean the ar…
How to Remove and Install the Rear Window Seal on a BMW 3 Series
How to Remove and Install the Rear Window Seal on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How to remove and install the rear window seal on a BMW 3 Series? Don't worry, let's see together in this video how to proceed. Start the removal: ta…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos