Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW X3 E83?

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Service warning light

Video tutorial
Detailed instructions - After performing the service on your BMW X3 (E83, the first generation), you can reset the service light yourself by following the steps shown in this short video tutorial. Start by inserting the key into the ignition switch and then look at the dashboard to locate the reset button next to the odometer: hold it down while turning the key to turn on the instrument cluster. Now keep an eye on the display because when the word "reset" appears, you need to release the button and press it again until the word starts to blink. At this point, just release the button and press it briefly once to complete the procedure.

Posted on 5 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the BMW X3 E83?
How to Reset the Service Light on the BMW X3 E83?
BMW X3 (2003-2010 / MK 1, E83) Resetting the service light on the BMW X3 E83 is very simple. First, insert the key without turning it. Press and hold the S/R button located at the …
How to reset the service light on the BMW X3
How to reset the service light on the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Resetting the service light, related to the car service on a BMW X3 model E83, is a simple and quick operation to be carried out independently. To re…
How to Reset the Service Light on the BMW X3
How to Reset the Service Light on the BMW X3
BMW X3 (2003-2010 / MK 1, E83) In today's video, you will see how to reset the service light on the BMW X3 E83. This guide also applies to other contemporary models, such as the Z4…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Peugeot 508?

To reset the tyre pressure warning light on the Peugeot 508, inflate the tyres until they reach the corresponding pressure value: this value is stated on the sticker attached to the driver’s door pillar. Once the tyres are inflated, proceed to the interior of the vehicle and turn on the instrument panel; if the warning light remains on, start the engine and drive for a few miles until the light turns off.

Watch the video!


by ScegliAuto

More videos