Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Rear Headlight Bulbs on BMW 3

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Tail light bulb

Let's replace the damaged bulbs in the rear headlights of a BMW 3. Open and lift the trunk to access the interior of the cargo area trim. Remove the fabric cover on the side of the cargo area, detach the plastic clips of the bulb holder. Disconnect the bulb holder from the rear headlight and replace the damaged bulbs with new ones (same voltage and size as the original). Install the bulb holder in the rear headlight: secure the plastic clips of the bulb holder in the headlight. Turn on the headlights at the end of the installation and check the operation.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Headlight of a BMW 3 Series
Removing the Rear Headlight of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) How do you remove the rear headlight of a BMW? Let's look at removing the rear headlight of a BMW 3 Series. Lift the trunk of the car and secure it. …
Remove the Rear Light on BMW 3
Remove the Rear Light on BMW 3
BMW Serie 3 (2012-2019 / F30, F31) Remove the rear light on a BMW 3 Series to replace it or to change the bulbs. Let's see how to disassemble the light. Lift the trunk lid, remove the …
Replacing the Headlight Bulbs on a BMW 3 Series
Replacing the Headlight Bulbs on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's replace the headlight bulbs on a BMW 3 Series. Open the hood by pulling the lever located at the bottom right of the dashboard and secure it wi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos