Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Headlight on BMW X3 F25

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Tail light

Lift the trunk lid and remove the cover located behind the affected headlight. Unscrew the 8 mm screw and remove the retaining clip. This simple operation will allow you to extract the headlight from its housing. Disconnect the connector, and you will have the headlight free. At this point, you can place your headlight wherever you want, such as on a workbench, and access any bulb from the back of it. In the case of the video, the LED for the brake light is being replaced, but this is the method to use for any rear bulb. Good luck!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of a BMW X3
How to Remove the Rear Headlight of a BMW X3
BMW X3 (2010-2017 / MK 2, F25) Before you can start, open the trunk lid of your BMW X3. Begin by prying off and removing the plastic cover near the rear headlight, exposing the bol…
How to Replace the Reverse Light Bulb on a BMW X3 F25
How to Replace the Reverse Light Bulb on a BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) If the reverse light bulb on your BMW X3 F25 has stopped working, you need to replace it to avoid any driving issues or risks. Below, you will find a…
Where is the fuse box of the BMW X3 F25 located?
Where is the fuse box of the BMW X3 F25 located?
BMW X3 (2010-2017 / MK 2, F25) Locating the box containing all the fuses of your BMW X3 F25 is really simple. All you have to do is read the following guide and follow step by step…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos