Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb on a BMW X3 F25

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Tail light bulb

If the reverse light bulb on your BMW X3 F25 has stopped working, you need to replace it to avoid any driving issues or risks. Below, you will find a simple and safe way to perform this operation. First, turn off the car completely and lift the hood. Reach inside the hood and locate the small compartment near the headlight. Remove the cover and disconnect the connector from the bulb. Replace the bulb with a new one and reconnect the connector. Finally, close the protective cover and lower the hood.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the BMW X3 F25 located?
Where is the fuse box of the BMW X3 F25 located?
BMW X3 (2010-2017 / MK 2, F25) Locating the box containing all the fuses of your BMW X3 F25 is really simple. All you have to do is read the following guide and follow step by step…
How to Replace the Battery in a BMW X3 F25
How to Replace the Battery in a BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) In this video, see how to replace the battery in a BMW X3 F25. In this vehicle, the battery is located in the rear trunk, under a specific section, s…
How to Replace the Cabin Air Filter on BMW X3 F25
How to Replace the Cabin Air Filter on BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) Access the cabin air filter on the BMW X3 F25 through the engine compartment, as the filter is located on the passenger side just below the windshiel…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos