Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the third stop BMW Serie 3 E92

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Tail light

In today's video tutorial we will see how to remove the third stop of a BMW 3 Series E92. First of all we access the rear part of the car and we go to unhook the central plastic of our third stop; then we go to press the tabs that we find internally and release the central stop, as shown in the video. At this point we disconnect the electrical connector of the bulbs, pressing gently on the tab, and we go to replace, if necessary, the burnt bulbs of our stop or directly replace the whole piece; apply the reverse procedure for reassembly!

Posted on 13 June 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake lights of the BMW 3 Series
How to replace the third brake lights of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Below we will see the instructions that will allow us to disassemble and replace the bulbs and the third brake light of the BMW 3 Series. First of al…
Diagram and location of the fuse boxes of the BMW 3 Series E92
Diagram and location of the fuse boxes of the BMW 3 Series E92
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video we can see the location and diagram of the fuse boxes of the BMW 3 Series E92 version: the first box is located in the passenger compar…
How to replace the sky in the BMW 3 Series E92?
How to replace the sky in the BMW 3 Series E92?
BMW Serie 3 (2005-2013 / E91, E90, E92) The headliner of our BMW 3 Series E92 has come unstuck and we want to do the DIY to replace it without spending the labor money in the workshop? No p…

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos