Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle of a BMW 6 Series

Model: BMW Serie 6 E64, E63 - Years 2003-2011
Part: Handle

Before you start, open the door of your BMW 6 Series. Pull and hold the external door handle. Meanwhile, unscrew and remove the screw that secures the handle to the door, accessing it through the designated hole on the side of the door. Once done, you will have freed the external handle. Proceed to unclip and remove it from the door of your BMW 6 Series. After completing this last step, you will have successfully disassembled it and can fit the new handle.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a BMW 6 Series
How to Remove the Front Door Panel of a BMW 6 Series
BMW Serie 6 (2003-2011 / E64, E63) The instructions in this guide will illustrate the procedure for removing the front door panel of a BMW 6 Series. First, open the front door of the v…
Where is the Fuse Box Located in the BMW Series 6 E63?
Where is the Fuse Box Located in the BMW Series 6 E63?
BMW Serie 6 (2003-2011 / E64, E63) In this new guide dedicated to your BMW Series 6 E63 (2003-2011), you will discover where the fuse box is located. This will allow you to safely and …
What is the fuse diagram for the BMW 6 Series?
BMW Serie 6 (2003-2011 / E64, E63) In this video, you can see the fuse diagram and the location of the various fuse boxes in the BMW 6 Series, useful if you need to check the status of…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos