Do it yourself
Frequently asked questions about cars and motorcycles

Where is the Cigarette Lighter Fuse in the BMW 3 Series E90?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuse box

The cigarette lighter fuse in the BMW 3 Series E90 is located, like all other fuses, inside the fuse box. To access it, enter the cabin from the passenger side and open the glove compartment. Next, rotate the two knobs on the inner wall of the glove box to remove it. Once removed, the fuse box will be visible: the cigarette lighter fuse is the one labeled with the number 31 in the owner's manual. To remove this fuse, you will need the special pliers located inside the fuse box.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) If the cigarette lighter socket of our BMW 3 Series has suddenly stopped working, we can first of all check the status of the corresponding fuse whos…
BMW Serie 3 (2005-2013 / E91, E90, E92) If the cigarette lighter in your BMW 3 Series has suddenly stopped working, first check the status of the related fuse. As shown in this video, it is…
BMW Serie 3 (2005-2013 / E91, E90, E92) These brief and simple steps will show you how to disassemble and replace the cigarette lighter socket in the BMW 3 Series. First, get inside the veh…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos