Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the interior lights ceiling on the BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Interior dome light bulb

In this video tutorial we will see the steps on how to disassemble and replace the interior ceiling light of the passenger compartment, together with the bulbs, on the BMW 3 Series E90. First we get on board the car and start by removing the sun visors, unscrewing the screws of the brackets, as shown in the video; then we go to remove the plastic cover of the ceiling light to unhook it. At this point we gently remove the ceiling light, disconnecting the electrical connectors of the bulbs; replace, if necessary, the latter or the ceiling light directly, and then reassemble everything!

Posted on 15 September 2021 by ScegliAuto

Video tutorial

Related tutorials

How to dismantle the ceiling of the BMW 3 Series
How to dismantle the ceiling of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) The instructions in this guide will show us the procedure for disassembling and replacing the headliner or interior trim of the BMW 3 Series. First, …
How to remove the headliner in the BMW 3 Series?
How to remove the headliner in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, we can see how to disassemble the headliner in the BMW 3 Series, a very simple and quick operation. First of all, we open the trunk…
Where is the fuse box of the BMW 3 Series E90
Where is the fuse box of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) The fuse box of your BMW 3 Series E90 (year 2005-2013) is located in a very well hidden position inside the passenger compartment so it is not always…

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos