Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headliner of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013

The instructions in this guide will show you the procedure for removing and replacing the headliner or interior roof lining of the BMW 3 Series. First, get inside the vehicle and start by removing all accessories attached to the headliner, as well as the sun visors, grab handles, and all the interior light fixtures (disconnecting the respective electrical connectors, as shown in the video). At this point, remove the plastic side pillars to pry off the lining until it is completely removed; apply the reverse procedure for reassembly!

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Headliner of the BMW 3 Series
Removing the Headliner of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Follow these step-by-step instructions to remove and replace the headliner of the BMW 3 Series. First, get inside the cabin and start by removing the…
How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner in a BMW 3 Series, a very simple and quick operation. First, open the trunk. Then, remove …
How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner from a BMW 3 Series E90, a very simple task. To do this, you will only need a flathead scr…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos