Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Brightness of the Instrument Cluster on the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Instrument cluster

To adjust the brightness of the instrument cluster on the BMW 3 Series, use the button located on the lever to the left of the steering wheel, where the symbol indicates increasing or decreasing brightness. Pressing the button upward will increase the brightness of the display, which can be monitored on the bar that appears in the center. Pressing the button downward will decrease the brightness, again following the bar. After adjusting the brightness to your preference, confirm the operation by turning the instrument cluster off and then back on.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the BMW 3 Series Instrument Cluster
How to Set the Clock on the BMW 3 Series Instrument Cluster
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to set the clock on the instrument cluster of the BMW 3 Series model E46 by yourself. To set the clock, turn on the instrum…
Reset BMW 3 Series E46 Instrument Cluster
Reset BMW 3 Series E46 Instrument Cluster
BMW Serie 3 (1998-2006 / E46) In this video, you will quickly learn how to reset and calibrate the instrument cluster of a BMW 3 Series E46, a procedure that also applies to other…
Removing the Speedometer/Dashboard of BMW 3 Series E36
Removing the Speedometer/Dashboard of BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In today's tutorial video, you will learn how to remove the speedometer/dashboard of a BMW 3 Series E36. First, get inside the car and start by unscr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos