Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Dismantling of the Car Radio

Model: BMW Z3 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Car stereo

Video tutorial

To remove the car radio from this vehicle, you need a suitable small screwdriver. Locate the two screws at either end of the radio that need to be removed using the screwdriver.

The screws are hidden under two small covers that must be lifted. To extract the radio, simply pull it back by grasping it from the cassette compartment.

Next, disconnect the antenna cable and, for any repairs or to obtain a replacement, take note of the numbers that make up the radio's code.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a BMW Z3
BMW Z3 (1995-2002 / MK 1) Remove the front left door panel on a BMW Z3. Use a screwdriver to remove the trim around the upper door handle. Take out the switch panel from the d…
Removal of the Left Front Door Panel of a BMW Z3
Removal of the Left Front Door Panel of a BMW Z3
BMW Z3 (1995-2002 / MK 1) Remove the left front door panel of a BMW Z3. Disconnect the battery terminals located in the engine compartment, and using a lever, detach the trim …
How to Remove the Dashboard of a BMW Z3
How to Remove the Dashboard of a BMW Z3
BMW Z3 (1995-2002 / MK 1) Let's see how to remove the needle gauges from the centre console of a BMW Z3 to replace the bulbs. Remove the stereo from the dashboard, unscrew the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos